Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

关于Fuzzy聚类分析及其在脊髓灰质炎中的应用

本文用Fuzzy数学的观点探讨了Fuzzy聚类分析，并通过对脊髓灰质炎病毒抗体水平的Fuzzy聚类分析，获得了良好的聚类效果，为该项问题的研究提供了科学依据。     

Simulations of stochastic sensing of proteins

We have performed Langevin dynamics and Poisson-Nernst-Planck calculations to simulate detection of proteins by genetically engineered alpha-hemolysin channels. In the recent stochastic sensing experiments, one end of a flexible polymer chain is permanently anchored inside the protein channel at a specified location, and the other end undergoes complexation with an analyte. Our simulations, using coarse-grained modeling, reproduce all essential qualitative results of the electrophysiology measurements of stochastic sensing. In addition, the underlying macromolecular mechanisms behind stochastic sensing are revealed in vivid details. The entropic fluctuations of the conformations of the tethered polymer chain dictate crucially the unique signatures of the ionic current trace of the channel and provide design rules for successful stochastic sensing. The origin of strong fluctuations in the ionic current of the channel is found to arise from the obstruction of the entrance at the beta-barrel of the channel by the fluctuating segments of the tether. Silencing of the pore is due to the suppression of conformational fluctuations of the chain, and the permanent blockade of ionic current is due to the threading of the tether through the channel. The onset of silencing and permanent blockade of the channel current cannot necessarily be attributed to the capture of analytes. In order for detection events to be timed accurately, the length and anchoring location of the tether must be tuned appropriately.     

β-甘露糖苷和β-氨基甘露糖苷的合成

高立体选择性地合成β-甘露糖苷和β-氨基甘露糖苷是糖化学家所面临的富有挑战性的问题。本文综述了合成β-甘露糖苷和β-氨基甘露糖苷的方法，侧重讨论各种方法在构建β-糖苷键时所具有的优势及其应用。     

超氧自由基O2-与人的血癌和心肌炎

本报告系采用间接法——分光光度法测定成人、小儿血癌患者及心肌炎小儿血中红细胞的超氧化物歧化酶(简称SOD)活性,以观察O_2~-水平。和正常人的相比 ,患参与之有非常显著(或显著)差异。心肌炎患者滴注大剂量维生素丙,(简称Vc)后,则SOD活性上升至正常水平。它初步提示:间接法适用于人体O_2~-的观察;血癌和心肌炎的发生确与SOD活性或O_2~-水平有关;在剂量Vc对心肌炎的治疗作用也和SOD活性或O_2~-水平的变化有关。     

STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel…     

Characterization of the Effects of Vanadium Traps in Cracking Catalysts by Imaging Secondary Ion Mass Spectrometry and Microactivity Test

The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SO_x removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl₂O₄ phase of Mg/Al₂O₃ additive is found capable of trapping vanadium while its MgO of Mg/Al₂O₃ phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst.     

Instanton effects on the interaction potential between light quarks and the isomultiplet mass splitting of baryons

On the basis of current assumptions of instanton theory we derive strictly the explicit dependence on the masses and spins of the instanton induced potential between a pair of light quarks in baryons, namelyV ₁₂=γ+β(m _* ^1+α )(m _* ^2+α )η(1-σ ₁ησ ₁), wherem _i ^* andσ _i (i=1.2) are respectively the mass and Pauli spin of theith quark. On the additional basis of the MIT bag model, we obtain γ=c/R ³ and β=b/R ³>0, and α>0 is independent of the radiusR of the baryon. The magnitudes of the parametersb and α are also estimated. The MIT bag model is improved by taking into account this potential. Isomultiplet mass splitting formulas are derived in good agreement with experiment.